Tooling Packages
Huth has combined the tooling you'll be reaching for most often into comprehensive, convenient tooling packages. Our Die Packages combine the tooling for bending and end-finishing with the accessories you need to get the most from your bender. Huth will custom manufacture tooling to your specifications.
| No. | TYPE | Size |
|---|---|---|
| 574* | Arbor | 27⁄8" to 6" |
| 572 | Arbor | 13⁄8" to 13⁄4" (Solid Piece) |
| 573 | Arbor | 13⁄4" to 4" (Solid Piece) |
| 481 | Segment | 27⁄8" to 31⁄2" |
| 472 | Segment | 11⁄2" to 13⁄4" (Solid Surface) |
| 474 | Segment | 13⁄4" to 21⁄8" |
| 475 | Segment | 21⁄8" to 21⁄2" |
| 476 | Segment | 21⁄2" to 3" |
| 482 | Segment | 33⁄8" to 4" |
| 483 | Segment | 37⁄8" to 41⁄2" |
| 484 | Segment | 43⁄8" to 5" |
| 485 | Segment | 47⁄8" to 51⁄2" |
| 486 | Segment | 53⁄8" to 6" |
| * All sizes are ID | ||
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder. (Standard on all Huth Bender models from September 1981 to present.)
| No. | Product Description |
|---|---|
| 5530 | Radius Die - 3" |
| 1350 | Back Shoe (2) - 3" |
| 1351 | Three-Quarter Shoe- 3" |
| 1352 | Half Shoe -3" |
| 855 | Die Pins (6) |
| 892 | Collet Holder - 3" |
| 1730 | Collet |
| 853 | Flaring/Flanging Tool 1½" to 3½" |
| 783 | Reducer (3” to 2½”) |
| 130 | Swage Die - 3" |
| 476* | Segment Set (2½” ID to 3” ID) |
| *Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573 |
|
For use on benders with 200 series collets with either a cam action or spin close style holder. (Standard on all Huth Bender models from 1955 to September 1981)
| No. | Product Description |
|---|---|
| 5530 | Radius Die - 3" |
| 1350 | Back Shoe (2) - 3" |
| 1351 | Three-Quarter Shoe - 3" |
| 1352 | Half Shoe - 3" |
| 855 | Die Pins (6) |
| 508 | Arbor 11⁄2" to 4" |
| 499 | Arbor Tip 1¾" to 4" |
| 476 | Segment Set (2 1⁄2" ID to 3" ID) |
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder. (Standard on all Huth Bender models from September 1981 to present.)
| No. | Product Desciption |
|---|---|
| 5534 | 5" Radius Die - 2¾" |
| 1234 | Back Shoe (2) - 2¾" |
| 1235 | Three-Quarter Shoe - 2¾" |
| 1236 | Half Shoe - 2¾" |
| 855 | Die Pins (6) |
| 1729 * | Collet - 2¾" |
| 790 |
Reducer (3" to 2¾") |
| 129 | Swage Die - 2¾" |
| *Requires 892 Collet Holder | |
| No. | Product Desciption |
|---|---|
| 5530 | 5" Radius Die - 3" |
| 1350 | Back Shoe (2) - 3" |
| 855 | Die Pins (4) |
| Choice of one of the following: | |
| 1351 | Three-Quarter Shoe with Pin |
| 1352 | Half Shoe with Pin |
| 476 * | Segment Set (2½" ID to 3" ID) |
| *Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573 |
|
| No. | Product Desciption |
|---|---|
| 5534 | 5" Radius Die - 2¾" |
| 1234 | Back Shoe (2) - 2¾" |
| 855 | Die Pins (4) |
| Choice of one of the following: | |
| 1235 | Three-Quarter Shoe with Pin |
| 1236 | Half Shoe with Pin |
| 476 * | Segment Set (2½" ID to 3" ID) |
| *Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573 |
|
Designed for benders which utilize 700 or 1700 series collets to perform 3" swaging.
| No. | Product Desciption |
|---|---|
| 892 | Collet Holder - 3" |
| 1730 | Collet - 3" |
| 130 | Swage Die - 3" |
| 783 | Reducer (3" to 2½") |
| 853 | Flaring / Flanging Tool (1½" to 3½") |
| No. | Product Desciption |
|---|---|
| 4178 | 4" Radius Die -17/8" |
| 178 | Swage Die -17/8" |
| 1178 | Back Shoe (2 pcs) -17/8" |
| 1043 | Half Shoe -17/8" |
| 1778 | Collet Set -17/8" |
| 855 | Die Pins (5 pcs) |
